Septic
  Systems

Like us on FacebookFollow us on Linkedin 

Get CULTEC Updates

 

 

 

 


Approved by:
IAPMO

 Autodesk

 

Modeling CULTEC Chambers in Autodesk Storm and Sanitary Analysis

Autodesk Storm and Sanitary Analysis is an advanced, powerful, and comprehensive hydrodynamic modeling package available for analyzing and designing urban drainage systems, stormwater sewers, and sanitary sewers. It can handle a variety of complex flow situations such as looped networks, interconnected ponds, and pumps. In addition, Autodesk Storm and Sanitary Analysis can model all aspects of stormwater quality/quantity and incorporates best management practices (BMPs), including support for all CULTEC storage chambers.

Any CULTEC storage chamber can be added to an Autodesk Storm and Sanitary Analysis project by performing following few simple steps:

Step 01: Start Autodesk Storm and Sanitary Analysis with a new project or open an existing project

Step 02:By double clicking on the “Storage Curves” from the data tree bring up the dialog

 Autodesk SSA Project Data

Figure 1: Autodesk SSA Data Tree 

Step 03: From the Storage Curves dialog, click on “Add” button to create a new storage curve. Then switch to the “Storage Chambers” tab.

Step 04: Select the desired CULTEC storage chamber type from the drop down list and set the Parameter values to match your project needs. Click on “Compute” button to calculate “Depth vs. Area” storage curve data for the selected CULTEC chamber. Click on “Close” to close the dialog.

 Autodesk Storage Curves

 Figure 2: Storage Curves Dialog

Step 05:Select Storage Node icon from the Autodesk Storm and Sanitary Analysis toolbar and click at the desired location on the “Plan View” to create a storage node element

Figure 3: Autodesk SSA Elements Toolbar

Step 06: Double click on the Storage Node icon ( ) to open the storage nodes property dialog.

Step 07: Specify the Storage Shape type as Storage Curve and select the previously defined storage curve    (Storage-01)

Autodesk SSA Storage Nodes 

Figure 4: Autodesk SSA Storage Nodes Dialog

Step 08: Define “Invert Elevation”, Maximum Elevation” and other input parameters required for storage nodes as per project specifications.

>>Click here for printable version